Geovision GV-R1352 Przewodnik Instalacji Pobierz pdf (Strona 9)

4. Overlaying Card Numbers on GV-System Live

View

You can overlay card numbers recognized at the reader onto a camera channel on GV-

System. To overlay card numbers on GV-System channel, the reader needs to be connected

to a GV-System through GV-COM, GV-Hub or GV-NET/IO Card V3.1.

RS-485

GV-HUB / GV-COM /

GV-NET/IO Card

RS-232

GV-System

(Light Blue) RS-485 -

(Blue) RS-485 +

USB

GV-RK1352

or GV-R1352

Note: GV-RK1352 / GV-R1352 is not compatible with GV-NET Card and GV-NET/IO Card

of versions earlier than V3.

4.1 Defining the ID Number and Setting the Reader to Slave

After the reader is connected to the computer of the GV-System, use the GV-R/RK/DFR

. Run GV-R/RK/DFR Config AP. Refer to 3. Installing the GV-R/RK/DFR Config AP above

Config AP to define the ID number of the reader and set the reader to Slave.

for how to install.

February 6, 2015

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 20 21

Brak uwag

Geovision GV-R1352 Przewodnik Instalacji Strona 9